Good Morning!

You are about to become a Super-Duper SuperAWOS field support tech for your airport.  Your airport, your pilots, and we, wish to thank you for your support.

Please review the following brief materials, and check off as you complete each step.  Handy excerpts from the FAA approved 'Operators Maintenance Manual' (OMM) are provided for you below, which you can print out and take with you out to the SuperAWOS site for handy reference.

For GENERAL QUESTIONS
Please call us at 800-878-6828		 For ONLINE TECH SUPPORT
Please call Gary Simon at Cell 617 974 0653
 
Step 1 First, obtain the current altimeter setting for your airport Review of AC 91-14D Altimeter Setting Excerpt
from FAA Approved
Operators Maintenance Manual OMM
Step 2 Second, enter the current altimeter value into a SuperAWOS Review Altimeter Training Video
Step 3 Third, calibrate a SuperAWOS visibility sensor Review Visibility Training Video Visibility Setting Excerpt
from FAA Approved
Operators Maintenance Manual OMM
!!! SUPPORT YOUR AIRPORT - REGISTER HERE AS A QUALIFIED FIELD TECH !!!
First Name
Last Name   
Prime Phone   
Second Phone   
Email   
Airport ID
By clicking below you confirm and accept the following, a copy of which will be retained on file.

FAA Approved Procedures 
1. I have read, understand, and will follow the procedures specified within the FAA approved Operators Maintenance Manual (OMM) required for calibrating SuperAWOS altimeter and visibility.
 
Setting Altimeter
2. I understand how to obtain a current altimeter value for an airport using aircraft altimeters and the procedures described
 
3. I have watched  the manufacturers training video and  understand how to calibrate a current altimeter value into a SuperAWOS

Setting Visibility
4.  I have watched the manufacturers training video and understand how to calibrate a SuperAWOS visibility sensor